Blumes Low Signal Shredder Bass Demo | EarthQuaker Devices

Video by EarthQuakerDevices via YouTube
Source
[wpas_products keywords=”EarthQuaker-Devices-Pedal”]
Blumes Low Signal Shredder Bass Demo | EarthQuaker Devices

Behold the mighty Blumes® Low Signal Shredder!

Blumes® is an all-analog tri-mode soft clipping bass overdrive that carries the torch of the classic screamer circuit but has a voice all its own. While embodying most of the characteristics and features of our beloved Plumes® Small Signal Shredder, this modified circuit has double the gain and a deeper bass response to retain all the low end. It utilizes internal bipolar power, which gives you more dynamics and all the headroom you could ever desire. The end result is a three-dimensional tone with added clarity that really pushes a nice tube amp over the edge.

By the way, 6-stringers, don’t fret- this is also the perfect pedal for all of your deep overdrive needs, especially you drop-tuned masters. We see you.

And much like the Plumes, this pedal offers three different clipping options for your desired low end face melting needs.

Mode 1 is symmetrical LED clipping that utilizes a pair of light emitting diodes. This is the crunchiest setting the Blumes has to offer. This signal is less compressed and way more open with tons of output for when you really want to go wild.

Mode 2 is a clean pure OpAmp gain boost mode. This eliminates the soft clipping diodes altogether and leaves you with straight OpAmp drive. This will be the loudest output with the fullest frequency response, which can be used as a clean boost when the Gain control is set below 11 o’clock.

Mode 3 is an asymmetrical silicon diode arrangement similar to the stock screamer but with more output and clean clarity, which provides more transparent tone. Using this mode gives a warmer low-end response and lower output. It’s fuzzier with half the output and is the most compressed. If you like the fuzzy ends of distortion with a clean undertone, you’ll love this setting. We guarantee it.

So take this magical box and make the thunder rumble, the tidal waves crash, and your unappreciative bandmates take notice. No longer will you be buried under those high-pitched guitars, crashing cymbals, and your singer’s overused falsetto. It’s our time to shine, baby! Make it rumble.

Controls
Gain: This controls the amount of drive.
Tone: More bass to the left, more middles in the middle and more treble to the right.
Level: This controls the output volume.

Clipping Modes (3-Way Toggle):
1. Symmetrical LED clipping – More crunch and compression.
2. No clipping – Wide open OpAmp drive for clean boost.
3. Asymmetrical silicon diode clipping – More transparency with a loose feel.

Each Blumes pedal is forged in the deepest, lowest caverns of Akron, Ohio, USA. As with all our products, it has a Lifetime Warranty.

You can also call 866-OVRDRVE to hear more Blumes sound samples!

Shot and Edited by Chris Tran
Recorded and Mixed by Jeff France
Performed by Jamie Stillman and Morgan Phelps

Gear:
1970 Precision Bass
Ibanez EHB1006 MS 6 String
Fender P-Bass Fretless
Fender P-Bass Fretted
Touch Guitars U8
Ampeg SVT w/ 8×10 Cab
Ampeg Portaflex 500 w/ Ampeg 1×15 Cab

Visit our site: http://www.earthquakerdevices.com
Follow us on Instagram: http://www.instagram.com/earthquakerdev
Like us on Facebook: http://www.facebook.com/EarthQuakerDevices
Follow us on Twitter: http://twitter.com/EarthQuakerDev

Go to Source