Video by JBL via YouTube
Source
[wpas_products keywords=”JBL-speaker”]
Let us help and guide you to set up your new JBL Spinner Bluetooth turntable.
⏱TIMESTAMPS⏱
00:00 Introduction
00:08 Step 1: Make sure the drive belt is fitted to the platter
00:11 Step 2: Place the platter on the spindle
00:15 Step 3: Carefully pull the belt over the drive spindle
00:21 Step 4: Add the slipmat
00:26 Step 5: Fit the headshell to the tonearm
00:35 Step 6: Push the counterweight onto the rear of the tonearm
00:40 Step 7: Make sure the anti-skate is set to ZERO (0)
00:42 Step 8: Remove the cartridge protector – BE CAREFUL!
00:47 Step 9: Turn the counterweight clockwise until the tonearm floats
01:02 Step 10: Set the dial on the counterweight to ZERO (0) at the top
01:12 Step 11: Then turn the counterweight one full turn clockwise
01:21 Step 12: Set the anti-skate to THREE (3) on the dial
01:30 Step 13: Fit the dust cover arms
01:35 Step 14: Fit the dust cover lid
01:42 Step 15: Put on a record, sit back, relax and enjoy! 🎶
Visit jbl.com