"Zen Go Synergy Core is a dream for home studio producers wanting high quality." – Nathan Larsen
Watch the full video: https://bit.ly/3obMiuY
Find out more about the interface: https://bit.ly/2XaaN1X
SUBSCRIBE: https://goo.gl/17IMzy for more exclusive videos.
Never miss a post from Antelope Audio:
https://www.instagram.com/antelope_audio
https://facebook.com/AntelopeAudio Tweets by AntelopeAudio
https://www.linkedin.com/company/ante…
Video by Live From The Lab :: TELEFUNKEN Soundstage via YouTube Source
Toad The Wet Sprocket – TELEFUNKEN Live From The Lab (Full Set)
00:00:19 Transient Whales
00:03:52 Starting Now
00:07:24 Fall Down
To download the full multitrack audio files for this session, please visit:
https://www.telefunken-elektroakustik.com/live-from-the-lab-season-6
South Windsor, CT, October 2021 – Alt Rock favorites Toad The Wet Sprocket dropped in at TELEFUNKEN headquarters in Connecticut during their recent tour. The band filmed three songs for the company’s “Live From The Lab” series and tried out TELEFUNKEN’s new 2022 TEC Award-nominated TF11 FET condenser mics on guitars, in addition to performing with their stock of M80 dynamic mics for vocals.
Founder, lead singer and multi-instrumentalist Glen Philips commented on the M80 vocal mics, “Our soundman has been switching me from mic to mic over the last few years, trying out some of the top brands in the market, but this year he brought out the M80 and we’re loving it – it’s totally responsive to my mic technique and he’s been using a fraction of the EQ he used to use. It’s a great mic, really clear in my ear, and he likes the bleed better when I step away.”
The band’s FOH engineer John Edman explained, “I’ve been working with Toad The Wet Sprocket and Glen Phillips for the last 5 years and this year I introduced the M80 for Glen to try out at rehearsals for the current tour we’re on and I received positive feedback from Glen. For starters, I didn’t need to EQ like before and I also found that the bottom was natural sounding and smoother with less of a proximity rise. The M80s off axis leakage sounded very natural, as if the mic had an omni quality to it without it being omni. A great mic for a great voice.”
The new album “Starting Now” is available and the current tour continues through the end of October. https://toadthewetsprocket.com/
****************************************************************
Microphones & Direct Boxes featured:
****************************************************************
The LIVE FROM THE LAB live music video series is recorded and filmed at TELEFUNKEN Elektroakustik’s facility in South Windsor, CT. Each session is tracked live exclusively with TELEFUNKEN microphones and features unique performances from a variety of local, regional, national, and international artists and ensembles.
The multitrack audio files from these sessions are available for free download via clickable links below the individual performance videos. All audio files are presented in .WAV format and were recorded at 24bit / 48KHz sample rate. They are clearly labeled in the same format with the source listed first (LEAD VOX, ACOUSTIC, PIANO), followed by the microphone used (C12, AR-51, etc.) and can be downloaded and imported into your Digital Audio Workstation of choice.
For more additional content please visit:
livefromthelab.net
www.t-funk.com
Go to Source
Author: Live From The Lab :: TELEFUNKEN Soundstage
Video by TELEFUNKEN Elektroakustik via YouTube Source
PROCEED AT YOUR OWN RISK! Tube microphones are fragile and can carry ‘shock-worthy’ voltages. We are not responsible for the well-being of you or your microphone. Please read all written instructions before proceeding!
BEFORE YOU START:
Turn off your power supply and disconnect it from the power outlet.
Disconnect the microphone from the tube microphone cable and power supply. We recommend leaving the microphone unplugged for at least an hour before starting.
We strongly recommend wearing rubber gloves, like in the video! Grease from your fingers can impact the operation of your microphone.
If you are uncomfortable with doing this, please contact us. You can always send your microphone in to us to have the tube changed.
USE ONLY ECC81 / 12AT7 TUBE TYPE FOR REPLACEMENT
Hold the microphone by the body tube, and remove the base ring by turning it counterclockwise until unthreaded.
Slide off the body tube.
Place the base ring and body tube aside.
Lay the microphone flat on a surface, and grip the tube socket with one hand and the tube damper with the other.
Gently pull on the tube while rocking it back and forth to loosen it, if necessary. Be careful not to bend the pins.
Slide the tube out from between the side rails by the damper.
Remove the damper from the tube and place it aside.
Position the tube damper near the center on your new tube.
Locate the gap in holes on the tube socket and in the pins of the new tube. Use one hand to angle the tube socket towards you and insert the new tube, lining up the gaps.
Press the tube flush to the socket, and carefully push the tube back between the side rails, as the damper secures it.
Locate the notch on the top plate and the notch on the body tube. Slide the body tube back over the microphone, lining up the notches.
Tightly fasten the base ring back on the microphone.
The narration for this video was recorded using the exact mic you saw in the video, a TELEFUNKEN AR-51.
Watch the full review of Music Repo about Zen Go SC: https://bit.ly/3q7vaJG
Find out more about the interface: https://bit.ly/2XaaN1X
SUBSCRIBE: https://goo.gl/17IMzy for more exclusive videos.
Never miss a post from Antelope Audio:
https://www.instagram.com/antelope_audio
https://facebook.com/AntelopeAudio Tweets by AntelopeAudio
https://www.linkedin.com/company/antelope-audio
Learn how Rupert Neve’s classic audio transformers evolved into the unique & powerful ‘Silk’ circuit found in our current equipment, and how Silk allows you to fine-tune the amount (and type) of musical harmonic content in your tracks, mixes, and masters.
In this video, RØDE Product Specialist Ryan Burke takes you through the features and specifications of the AI-Micro ultra-compact dual-channel interface for mobile devices and computers.
Key features of the AI-Micro:
– Ultra-compact dual-channel audio interface for computers and mobile devices
– Compatible with virtually any microphone with a 3.5mm output, including RØDE VideoMics, lavaliers, wireless systems and stereo microphones
– Auto-sensing inputs for connecting TRS or TRRS microphones
– High-quality headphone output for zero-latency audio monitoring and playback
– Connects seamlessly to computers, smartphones and tablets via its universal USB output (USB-A, USB-C and Lightning cables supplied)
– Compatible with the RØDE app suite for expanded features and functionality, on-the-go configuration and broadcast-quality recording on any device
Learn more about the AI-Micro here: https://rode.com/ai-micro
Check out the AI-Micro Learning Hub for in-depth information about its features and functions: https://rode.com/ai-micro/learning-hub
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Cookie settingsACCEPT
Privacy & Cookies Policy
Privacy Overview
This website uses cookies to improve your experience while you navigate through the website. Out of these cookies, the cookies that are categorized as necessary are stored on your browser as they are essential for the working of basic functionalities of the website. We also use third-party cookies that help us analyze and understand how you use this website. These cookies will be stored in your browser only with your consent. You also have the option to opt-out of these cookies. But opting out of some of these cookies may have an effect on your browsing experience.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.
